4D SYSTEMS-HAT Primary Display 2.4
4D SYSTEMS-HAT Primary Display 2.4
4D SYSTEMS-HAT Primary Display 2.4

4D SYSTEMS-HAT Primary Display 2.4

110.00 SAR
The 4DPI-24-HAT is a 2.4-inch 320 x 240 Primary Display HAT for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel, enabling the 4DPi-24-HAT to function with the Raspberry Pi without the need for a mouse. Communication between the 4DPi-24-HAT and the Raspberry Pi is interfaced with a high speed 48MHz SPI connection, which utilises an on-board processor for direct command interpretation and SPI communication compression and features a customised DMA enabled kernel. It is designed to work with the Raspbian operating system running on the Raspberry Pi, as that is the official Raspberry Pi operating system. The 4DPi-24-HAT is powered directly off the Raspberry Pi's 40 way Header and the 2.4" touch screen allows effortless interaction with the Raspbian operating system.

  • Universal 2.4" primary display for the Raspberry Pi

  • 320 x 240 QVGA Resolution, RGB 65K true to life colours

  • TFT screen with integrated 4-wire resistive touch panel

  • Display full GUI output/primary output, just like a monitor connected to the Raspberry Pi

  • Powered directly off the Raspberry Pi, no external power supply is required

  • 25FPS Typical frame rate, higher if image is able to be compressed by Kernel

  • On/Off or PWM controlled backlight, selectable by on board jumper

  • On board identification EEPROM